Return to Topological.tex CVS log

Up to [Nicadd] / ttbar / p20_taujets_note

Annotation of ttbar/p20_taujets_note/Topological.tex, revision 1.2

1.1       uid12904    1: \newpage
                      2: 
                      3: \section{\label{sub:Topo}Topological variables}
                      4: 
1.2     ! uid12904    5: In this section we show distributions of the topological variables used in this analysis in order to
        !             6: check the agreement between data and Monte Carlo in all cases. Plots are separated into two sets:
1.1       uid12904    7: signal sample and b-veto control plots.
                      8: 
                      9: \subsection{\label{sub:signalplots}Signal sample plots}
                     10: 
                     11: As stated in Section \ref{sub:Results-of-the} the signal sample is the one we used to perform
                     12: the measurement. The cuts here consist of  $NN(\tau)>0.90$ for taus types 1 and 2,
                     13: $NN(\tau)>0.95$ for taus type 3, and at least one NN b-tag. This sample contains
                     14: a good amount of $t\bar{t}$ (19.7\% for types 1 and 2 and 8.6\% for type 3) as shown in Tables
                     15: \ref{b_and_tau_type1_2} and \ref{b_and_tau_type_3}. Next we show the plots of
                     16: the topological variables for this sample. The error bars represent the statistical uncertainties only.
                     17: 
                     18: \begin{figure}[h]
                     19: \includegraphics[scale=0.34]{CONTROLPLOTS/Std_TypeI_II/aplan}
                     20: \includegraphics[scale=0.34]{CONTROLPLOTS/Std_TypeI_II/ht}
                     21: \includegraphics[scale=0.34]{CONTROLPLOTS/Std_TypeI_II/cent}
                     22: \includegraphics[scale=0.34]{CONTROLPLOTS/Std_TypeI_II/spher}
                     23: 
                     24: \caption{The topological variables in the signal sample
                     25: ($\tau$ types 1 and 2). The Kolmogorov-Smirnov (KS) probabilities are shown,
                     26: indicating the level of agreement.}
                     27: 
                     28: %\label{fig:variables_type2_Std} 
                     29: \end{figure}
                     30: 
                     31: \newpage
                     32: 
                     33: \begin{figure}[t]
                     34: \includegraphics[scale=0.34]{CONTROLPLOTS/Std_TypeI_II/sqrts}
                     35: \includegraphics[scale=0.34]{CONTROLPLOTS/Std_TypeI_II/costhetastar}
                     36: \includegraphics[scale=0.34]{CONTROLPLOTS/Std_TypeI_II/metl}
                     37: \includegraphics[scale=0.34]{CONTROLPLOTS/Std_TypeI_II/met}
                     38: 
                     39: \caption{The topological variables in the signal sample
                     40: ($\tau$ types 1 and 2). The Kolmogorov-Smirnov (KS) probabilities are shown,
                     41: indicating the level of agreement.}
                     42: %\label{fig:variables_type2_Std} 
                     43: \end{figure}
                     44: 
                     45: 
                     46: \begin{figure}[b]
                     47: \includegraphics[scale=0.34]{CONTROLPLOTS/Std_TypeIII/aplan}
                     48: \includegraphics[scale=0.34]{CONTROLPLOTS/Std_TypeIII/ht}
                     49: \includegraphics[scale=0.34]{CONTROLPLOTS/Std_TypeIII/cent}
                     50: \includegraphics[scale=0.34]{CONTROLPLOTS/Std_TypeIII/spher}
                     51: 
                     52: \caption{The topological variables in the signal sample
                     53: ($\tau$ types 3). The Kolmogorov-Smirnov (KS) probabilities are shown,
                     54: indicating the level of agreement.}
                     55: %\label{fig:variables_type2_Std} 
                     56: \end{figure}
                     57: 
                     58: \begin{figure}[t]
                     59: \includegraphics[scale=0.34]{CONTROLPLOTS/Std_TypeIII/sqrts}
                     60: \includegraphics[scale=0.34]{CONTROLPLOTS/Std_TypeIII/costhetastar}
                     61: \includegraphics[scale=0.34]{CONTROLPLOTS/Std_TypeIII/metl}
                     62: \includegraphics[scale=0.34]{CONTROLPLOTS/Std_TypeIII/met}
                     63: 
                     64: \caption{The topological variables in the signal sample
                     65: ($\tau$ types 3). The Kolmogorov-Smirnov (KS) probabilities are shown,
                     66: indicating the level of agreement.}
                     67: %\label{fig:variables_type2_Std} 
                     68: \end{figure}
                     69: 
                     70: \clearpage
                     71: 
                     72: \subsection{\label{sub:signalplots}b-veto control sample plots}
                     73: 
                     74: The b-veto sample is the one used to test our QCD modelling \ref{sub:Results-of-the}. As it requires no
                     75: NN b-tags it is QCD-dominated and has a tiny amount of $t\bar{t}$ (1.9\% for types 1 and 2 and 0.7\% for type 3) 
                     76: as shown in Tables \ref{bveto_type1_2} and \ref{b_veto_type_3}. It consists of an ideal sample to make sure
                     77: that the QCD modelling works and can be used in the measurement. Next we show the plots of
                     78: the topological variables for this sample. The error bars represent the statistical uncertainties only.
                     79: 
                     80: \begin{figure}[h]
                     81: \includegraphics[scale=0.34]{CONTROLPLOTS/bveto_TypeI_II/aplan}
                     82: \includegraphics[scale=0.34]{CONTROLPLOTS/bveto_TypeI_II/ht}
                     83: \includegraphics[scale=0.34]{CONTROLPLOTS/bveto_TypeI_II/cent}
                     84: \includegraphics[scale=0.34]{CONTROLPLOTS/bveto_TypeI_II/spher}
                     85: 
                     86: \caption{The topological variables in the b-veto control sample
                     87: ($\tau$ types 1 and 2). The Kolmogorov-Smirnov (KS) probabilities are shown,
                     88: indicating how good the agreement is.}
                     89: 
                     90: %\label{fig:variables_type2_bveto} 
                     91: \end{figure}
                     92: 
                     93: \newpage
                     94: 
                     95: \begin{figure}[t]
                     96: \includegraphics[scale=0.34]{CONTROLPLOTS/bveto_TypeI_II/sqrts}
                     97: \includegraphics[scale=0.34]{CONTROLPLOTS/bveto_TypeI_II/costhetastar}
                     98: \includegraphics[scale=0.34]{CONTROLPLOTS/bveto_TypeI_II/metl}
                     99: \includegraphics[scale=0.34]{CONTROLPLOTS/bveto_TypeI_II/met}
                    100: 
                    101: \caption{The topological variables in the b-veto control sample
                    102: ($\tau$ types 1 and 2). The Kolmogorov-Smirnov (KS) probabilities are shown,
                    103: indicating how good the agreement is.}
                    104: 
                    105: %\label{fig:variables_type2_bveto} 
                    106: \end{figure}
                    107: 
                    108: \begin{figure}[b]
                    109: \includegraphics[scale=0.34]{CONTROLPLOTS/bveto_TypeIII/aplan}
                    110: \includegraphics[scale=0.34]{CONTROLPLOTS/bveto_TypeIII/ht}
                    111: \includegraphics[scale=0.34]{CONTROLPLOTS/bveto_TypeIII/cent}
                    112: \includegraphics[scale=0.34]{CONTROLPLOTS/bveto_TypeIII/spher}
                    113: 
                    114: \caption{The topological variables in the b-veto control sample
                    115: ($\tau$ types 3). The Kolmogorov-Smirnov (KS) probabilities are shown,
                    116: indicating how good the agreement is.}
                    117: 
                    118: %\label{fig:variables_type2_bveto} 
                    119: \end{figure}
                    120: 
                    121: 
                    122: \begin{figure}[t]
                    123: \includegraphics[scale=0.34]{CONTROLPLOTS/bveto_TypeIII/sqrts}
                    124: \includegraphics[scale=0.34]{CONTROLPLOTS/bveto_TypeIII/costhetastar}
                    125: \includegraphics[scale=0.34]{CONTROLPLOTS/bveto_TypeIII/metl}
                    126: \includegraphics[scale=0.34]{CONTROLPLOTS/bveto_TypeIII/met}
                    127: 
                    128: \caption{The topological variables in the b-veto control sample
                    129: ($\tau$ types 3). The Kolmogorov-Smirnov (KS) probabilities are shown,
                    130: indicating how good the agreement is.}
                    131: 
                    132: %\label{fig:variables_type2_bveto} 
                    133: \end{figure}
                    134: 
                    135: \clearpage
                    136: